Helmets, which have been very effective in the prevention of work accidents, especially in recent years, must be made under certain conditions in order to create a healthier working environment.
These conditions are very closely related to both the helmet user and the organization that produces the helmet, and they are legal conditions by the labor law. In general, the following standards must be met within the scope of helmet production:
- TS2429 EN 397 (Puncture, pressure and external factor test)
- ANSI z-89 (Voltage test)
- EN 397 (General dimension requirements)
These three main tests should be applied and reported on the helmet in separate time periods during the helmet production. After the reports are approved by the regional occupational health and safety institution, helmet production is carried out.
It should not be forgotten that since helmets are always needed materials, such products are produced in different models and features. If you are going to buy such products, you must take part in a comprehensive research on the prices of the products!
Helmet Production Dimensions and Colors
In helmets, the dimensions and colors of the helmets are very important for the production of helmets. The paints to be used are special paints and should not flow when exposed to liquid. Conditions related to paint are given in EC standards. Likewise, dimensions and weights are very important in helmet production. During the production of helmets, the helmets must be 500 grams at most.
Today, it is generally produced in 300 to 350 grams of land. At the same time, helmet production should be produced by calculating a certain wearing height. The production of 3 different numbers is another condition for the production of helmets.
Helmet Production Considerations
The main purpose of the helmets is to protect the health of the workers and in this sense, helmets are produced. The company name and production date are written on the back of each helmet. At the same time, the shelf life is also written. According to the relevant article of the labor law, the shelf life of the helmets must be 5 years.
At the same time, the tests and experiments carried out on the inside of the helmet must be written. It is also very important that these important terms are written in an indelible way. Otherwise, it is inconvenient to offer the helmets for sale.