Weekdays 08:30 – 18:00 CE Certified · Made in Türkiye
Karam Safety
Blog 2 min read Karam Safety

Construction-Type Safety Belt Parts

Construction-Type Safety Belt Parts
In This Article

The construction-type safety belt is also known as the full body (parachute type) safety harness. It is used anywhere there is a risk of falling, so that the person can protect themselves and stay safe. Construction-type safety belt parts on the front consist of seven separate parts: reflective tape, chest straps, chest carabiner, adjustment buckles, buckles, waist connection straps and leg straps. On the back, it consists of five parts: reflective tape, dorsal D-ring, waist pad, tool-carrying loop and hip straps.

Intended Uses of Construction-Type Safety Belt Parts

Construction-type safety belt parts are divided into two groups: lanyards and carabiners. These two groups are further divided into straps, buckles and rings. Their intended uses are as follows:

  1. Reflective tape: Also known as lanyard keepers. Easy to stow away, it opens in a single movement and prevents tripping.
  2. Adjustment and D buckles: Used on most construction-type safety belts to connect the two main straps to each other. They must be tested before use.
  3. Dorsal D-ring: Keeps workers centred and balanced.
  4. Waist pad: Although not present on all construction-type safety belts, it is used for comfort.
  5. Chest, connection, leg and hip straps: Made up of ropes and webbing, they connect all the parts to one another. They make up almost the entire safety belt.

Points to Consider Regarding Construction-Type Safety Belt Parts 

Before use, there are certain points regarding construction-type safety belt parts that we need to pay attention to. Some of them are as follows:

  • Check that the buckle bar sits on the buckle frame and whether it moves easily. The buckles are also checked for any deformation, breakage, corrosion or rust.
  • Webbing and D-ring: Visually check for any burnt, cut, worn or damaged areas.
  • Each part of the safety belt must be marked permanently and indelibly, in the language of the country to which it is shipped, using a suitable method that has no harmful effect on the marked parts.
  • The marked parts must include identification details, the manufacturer's batch number, the model and type, the number and year of the standard to which the equipment relates, and documents the user will read on how to use it.
Get expert support to choose the right product.

Let our team recommend the best equipment for your needs and quote you quickly.

Get in Touch

WhatsApp Request a Quote