Weekdays 08:30 – 18:00 CE Certified · Made in Türkiye
Karam Safety
Blog 2 min read Karam Safety

How to Wear a Parachute Type Safety Harness?

How to Wear a Parachute Type Safety Harness?
In This Article

The parachute type safety harness is among the equipment whose use is mandatory at heights where there is a risk of falling. The question how to wear a parachute type safety harness comes up frequently among workers. The fact that the equipment consists of many parts raises questions about how to use and wear it.

The parachute type safety harness must be used in accordance with the instructions given in the user manual. Putting it on can be explained as follows: first of all, equipment suitable for the worker's body size should be selected. Since it surrounds the whole body, each part is designed in different sizes. For this reason, the arm, leg and back straps must be worn correctly. Finally, each part should be customised using the adjusters that allow it to be set to different sizes. When adjusting it to body size, it should not be too tight or too loose.

Parachute Type Safety Harness Instructions for Use

When you buy a parachute type safety harness, a user manual and instructions for use are supplied together with the product. This is called the parachute type safety harness instructions for use. Care should be taken not to deviate from the specified instructions while using the product.

The parachute type safety harness is among the equipment made mandatory for risky areas under the occupational health and safety regulations.  The specified instructions cover the use of the equipment, its suitability for the worker, product quality and the parts the equipment must include. They also answer questions such as how to wear a parachute type safety harness .

Parachute Type Safety Harness Standards

Since the parachute type safety harness consists of many different parts, these parts must be certified with the necessary quality assurance. The requirements it must meet, such as conditions of use and its parts, are set out in the parachute type safety harness standards.

The requirements a safety harness must meet under the standards can be listed as follows: it must offer comfortable use. It must not place a burden on the worker, and the connecting rope must be of the specified length. In addition, the straps used must be 12 cm wide and 6 mm thick. The metal parts in the equipment must be made of stainless steel. The worker must be informed about the use of the product. Points that may raise questions, such as how to wear a parachute type safety harness, must be clarified.

Parachute Type Safety Harness Sizes

Every worker's body size is different. Although fit to the body is basically achieved with the adjusters in the equipment, this can only be done to a limited extent. Parachute type safety harness sizes are sold as small, medium, large and extra large. However, there are also standardised safety harness sizes. When putting on a safety harness, make sure it fits your body size. If you have questions such as how to wear a parachute type safety harness, you can refer to the user manual for help.

Get expert support to choose the right product.

Let our team recommend the best equipment for your needs and quote you quickly.

Get in Touch

WhatsApp Request a Quote