Weekdays 08:30 – 18:00 CE Certified · Made in Türkiye
Karam Safety
Blog 3 min read Karam Safety

Safety Harness Standard in Occupational Safety

Safety Harness Standard in Occupational Safety
In This Article

Occupational accidents always pose a risk, especially in lines of work with a high hazard class. The Safety Harness Standard in Occupational Safety has been defined for different lines of work by means of various criteria. The production details of safety harnesses are grouped by the material they are made of, width, thickness and load capacity.

In occupational safety, taking precautions in the working environment is important, but so is reducing completely the risk of employees having an occupational accident, so that undesirable situations do not occur. There are international criteria on how safety harnesses are to be manufactured and on production tests. These details, set out in the Occupational Health and Safety Regulation, specify that the straps are to be made of chrome-tanned and sole leather, that the load capacity is to be 1150 kg, the width 12 cm and the thickness 6 mm. Safety harnesses are grouped according to the lines of work in which they are used.

General Purpose Safety Harnesses

The purpose of using this safety harness is to catch the worker in the event of a fall and to reduce the distance fallen. It consists of a safety rope and metal parts. Waist-type safety belts, also called waist belts, have a D-ring to which one end of the safety rope is attached. Apart from this, shoulder and leg straps may also be used. If shoulder and leg straps are used, the harness must be attached at chest level. The reason for this is one of the main aims of the Safety Harness Standard in Occupational Safety Criteria: to minimise the risk of the worker being harmed while working and to prevent damage to internal organs in the event of a fall. If shoulder and leg straps are not used, the waist-type safety belt is fastened around the waist only.

The type of waist safety belt that has straps and can sometimes be worn with clothing is called the full body (parachute type) safety harness. The purpose of the parachute type safety harness is to reduce the harmful effect of the force acting on the body at the moment of a fall by distributing it from the torso to the legs.

Safety Harnesses Used in Tower, Pole and Window Cleaning Work

These harnesses support the worker on the one hand and allow the worker to use both hands on the other. Under the Safety Harness Standard in Occupational Safety, they differ from the waist-type safety belt in that the harness is attached to the D-ring at two points.  In addition to the protective equipment, two safety ropes are also used with this harness, especially for window cleaning work.

Safety Harnesses for Confined Spaces

These harnesses, used in risky places where movement is difficult, such as wells and channels, have a rescue rope and a strap set. Within the criteria of the Safety Harness Standard in Occupational Safety, the working area is also very important. This harness also has a rescue rope so that the worker can be pulled out.

Get expert support to choose the right product.

Let our team recommend the best equipment for your needs and quote you quickly.

Get in Touch

WhatsApp Request a Quote