Weekdays 08:30 – 18:00 CE Certified · Made in Türkiye
Karam Safety
Blog 2 min read Karam Safety

Safety Helmet Manufacturing

Safety Helmet Manufacturing
In This Article

Safety helmets must be produced in accordance with certain safety helmet manufacturing requirements and standards. These requirements are very important in terms of health, as they allow the user to work in better conditions. For this reason, during safety helmet manufacturing , experts carry out a variety of checks. Safety helmet manufacturing must comply with the following standards:

  • EN 397 standards
  • CE certification standards

The standards above are the requirements that determine a safety helmet's colours and usage characteristics. Products that do not meet these requirements must not go through safety helmet manufacturing . The requirements above apply to blue, white, green, yellow and orange safety helmets. For the manufacture of red safety helmets, the EN 812 standard must also be complied with in addition to EN 397 and CE.

Safety Helmet Manufacturing Requirements

Products resulting from safety helmet manufacturing carried out without meeting the manufacturing requirements tire the user considerably under working conditions. Moreover, such helmets have no protective properties at all and can even cause occupational accidents. Safety helmet manufacturing requirements are generally as follows:

  • Made of material resistant to sweat and electricity
  • At least 5 ribs for the strength of the helmet shell
  • The helmet peak should be at least 5 cm
  • The helmet width should not be less than 25 cm
  • Each type must go through safety helmet manufacturing in 3 different sizes. These sizes should be 50-54, 54-57 and 57-60

Today, in parallel with the development of production technologies, safety helmets are also manufactured to a much higher standard of quality. This also makes it possible for the prices of these products to be set at a much more reasonable level. Therefore, if you are going to buy safety helmets, you should definitely carry out comprehensive research on the prices of such products!

Safety Helmet Manufacturing Features by Colour

The features that safety helmets, which come in 6 different types in total, must have during safety helmet manufacturing differ from one another. During the manufacture of blue safety helmets , there must be a space on the front of the helmet where the company name and blood group can be written. Yellow safety helmets, in addition to meeting CE standards, must be of the ratchet type. Green safety helmets must be manufactured with additional measures that protect against electricity and must also be of the ratchet type.

Get expert support to choose the right product.

Let our team recommend the best equipment for your needs and quote you quickly.

Get in Touch

WhatsApp Request a Quote