In This Article
Safety helmets have been highly effective in preventing occupational accidents, especially in recent years, and in order to create a healthier working environment, safety helmet production must be carried out under certain conditions.
These conditions closely concern both the helmet user and the company engaged in safety helmet production, and they are legal requirements set by labour law. In general, the following standards must be met within the scope of safety helmet production:
- TS2429 EN 397 (Penetration, compression and external factors test)
- ANSI z-89 (Voltage test)
- EN 397 (General dimensional requirements)
During safety helmet production, these three main tests must be applied to the helmet at separate times and reported. Safety helmet production takes place after the reports have been approved by the regional occupational health and safety authority.
It should not be forgotten that, since safety helmets are always needed, such products are manufactured in different models and with different features. If you are going to purchase such products, you should definitely carry out comprehensive research into their prices!
Sizes and Colours in Safety Helmet Production
The sizes and colours of helmets are very important for safety helmet production. The paints used must be special paints that do not run when exposed to liquid. The paint requirements are given in the EC standards. Likewise, sizes and weights are also very important in safety helmet production. During safety helmet production, helmets must weigh no more than 500 grams.
Today, they are generally produced at between 300 and 350 grams. At the same time, safety helmet production must take into account a specific wearing height. Production in 3 different sizes is another requirement of safety helmet production.
Points to Consider in Safety Helmet Production
The main purpose of safety helmets is to protect workers' health, and safety helmet production is carried out with this in mind. The company name and production date are written on the back of each helmet, together with its shelf life. Under the relevant article of the labour law, the shelf life of helmets must be 5 years.
In addition, the tests and trials carried out must be written on the inside of the helmet. It is also very important that these essential details are written in an indelible way. Otherwise, it is inadvisable to offer the helmets for sale.
Let our team recommend the best equipment for your needs and quote you quickly.








