In This Article
Working at height is a situation commonly encountered in many sectors such as construction, energy, telecommunications and industrial maintenance. One of the most critical items of safety equipment used in these fields is the carabiner. A correctly used carabiner can save workers' lives. Wrong selection or incorrect use, however, can lead to serious occupational accidents.
1. Choosing the Right Carabiner
-
Compliance with standards: It must have international certifications such as CE, EN and ANSI.
-
Strength: A minimum load capacity of 22 kN should be preferred.
-
Locking system: Screw-lock or auto-locking models increase safety.
2. Checking the Locking Mechanism
The carabiner's locking mechanism must always be checked before each use. If the lock is left open or half-closed, the connection point may open under load.
3. Correct Positioning
-
The carabiner must be positioned so that it bears the load along its major axis.
-
Minor-axis loading (cross-loading) increases the risk of breakage.
4. Checking for Damage and Wear
The surface of the carabiner must be inspected regularly for cracks, rust and deformation. Worn equipment must be replaced immediately.
5. Suitable Area of Use
-
Steel carabiners are suitable for heavy loads and industrial work.
-
Aluminium carabiners can be preferred for light work, but are not recommended in areas requiring intensive occupational safety.
6. Periodic Maintenance and Training
-
Carabiners should be lubricated periodically and kept clean.
-
Employees should receive occupational safety training on the use of carabiners.
Conclusion
Carabiners used when working at height are among the most important components of safety. Through correct selection, regular inspection and conscious use, it is possible to prevent occupational accidents. Remember: a small piece of equipment saves a big life.
Let our team recommend the best equipment for your needs and quote you quickly.








