In This Article
It is mandatory to wear a safety harness on the exterior of buildings higher than 4 metres, on roofs, or in high places such as towers and poles. So, what does an occupational safety harness do?
How to Put On a Construction Safety Harness
The construction safety harness is designed to protect workers working in high places such as construction sites. By focusing on the back, arms, shoulders and legs, it protects workers in the event of a possible accident. How do you put on a construction safety harness? The first thing to do is to check the harness for any damage or wear. Worn or frayed harnesses must not be used. After choosing the harness according to your size, hold it by its D-ring. Make sure that the buckles on the harness work properly. The harness you use must not have been involved in a previous fall. After putting the harness on over your shoulders, you must first fasten the chest strap. Then fasten the leg straps. If your hands can come out of the leg strap clenched in a fist, you must tighten the harness. Finally, adjust the waist belt to your waist and fasten it.
Using a Safety Harness on Scaffolding
No matter how sturdy scaffolding platforms are, or how stable they are so as not to move, accidents are extremely common. To prevent accidents, you must be meticulous about using a safety harness on scaffolding. However, workers frequently use the safety harness incorrectly. Harnesses must not be attached to guardrail systems. They must be checked for wear and deterioration at every use. If the harness used is a full body safety harness, it must sit in the middle of the worker's back and be worn so that it is close to shoulder level. The safety harness used must be securely connected to the safety rope.
At What Intervals Should Safety Harnesses Be Inspected?
Fall accidents happen very frequently around the world. You can save your life by using fall arrest safety harnesses. At what intervals should the safety harnesses you use be inspected? You should inspect your safety harness not once a month or once a week, but before every use. Unravelled stitching and wear left from previous uses can endanger your life. Before each use, you must check the buckles and stitching before putting the harness on. If the harness you are going to use has been involved in any fall, you must not use it.
Let our team recommend the best equipment for your needs and quote you quickly.








