In This Article
What is a full body type safety harness is a topic that falls within the scope of occupational safety equipment. People who work at height and who would face mortal danger in the event of a fall use the full body (parachute type) safety harness.
Parachute harnesses fully secure the shoulders, legs and chest area so as to protect the whole body. When choosing a parachute harness, it is necessary to choose a model that can fully carry the weight of the person who will use it. Safety harnesses are mandatory in working areas higher than 3 metres.
If an employee falls while wearing a safety harness, they are entitled to compensation. Parachute safety harnesses must be checked every time before use and maintained after use.
Full Body Type Safety Harness Standards
Full body type safety harnesses must be manufactured from pure fibre material or multi-fibre material. Their structure is made up of synthetic fibres.
The synthetic fibres used must have a tenacity of 0.6 N/tex. Along with the question of what a full body type safety harness is, its structural features are also important. The other structural features of a safety harness that is safe to use are as follows:
- Thread is used for the woven parts, and it must be of high quality.
- The threads used must be in colours contrasting with the safety harness so that they can be checked easily during maintenance.
- The straps in the shoulder area and the lower support area must be 40 mm wide, and the secondary straps 20 mm wide.
- The metal parts must comply with the EN 362 standard.
Body Type Safety Harness
Parachute type safety harnesses are manufactured for work-at-height areas so as to provide protection for the whole body. They must always be checked before each use. During the check, the webbing parts are inspected for any change in colour.
The webbing parts are inspected for wear. The stitching that holds the webbing is checked to make sure it has not come undone. The harness buckles are checked by pulling on them. It is ensured that there is no rust, deformation or the like on the metal parts.
The brand of the safety harness must be legible at all times. If an adverse condition is found in even a single area during the check, the harness is not used.
Let our team recommend the best equipment for your needs and quote you quickly.








