Weekdays 08:30 – 18:00 CE Certified · Made in Türkiye
Karam Safety
Blog 2 min read Karam Safety

Shock Absorber Lanyard Usage Mistakes

Shock Absorber Lanyard Usage Mistakes
In This Article

When working at height, the most common and fundamental fall arrest method among safe working techniques is the use of a lanyard. A lanyard may be manufactured with various types of rope and carabiners. Obtaining the right product for your work site will speed up your work and, above all, ensure that you work safely. As a further precaution, you can choose a lanyard with or without a shock absorber.

Here you need to consider the type of environment you are working in, the level of your anchor points and, consequently, the shock effect you would experience in a possible fall, and take precautions against every eventuality. The fall impact, i.e. the shock effect, and clearance distance is quite a long subject. In a possible fall, if the right equipment, a secure connection and a clean fall are in place, the user will remain suspended in a safe condition as indicated by the standards.

In such a hazard, the user must not repeat a common mistake regarding the use of a shock absorber lanyard . The side rings of a safety harness are not suitable for attaching shock absorber lanyards. In fact, this practice can lead to a more dangerous situation when working at height. To reduce the effect of the fall on the user, the shock absorber extends as its stitching tears open, until all the stitches have opened and it reaches its final length. If, at the moment of a fall, one arm of a twin shock absorber lanyard is attached to the side ring of the harness, the shock absorber will not extend and will not be able to reduce the arrest shock.

Fall Arrest Lanyards

The length of the lanyard to be used for arresting and preventing falls, including the carabiners and shock absorbers on it, must be a maximum of 2 m. Lanyard lengths generally range between 115 cm and 200 cm. A fall arrest lanyard must have a shock absorber body to reduce the adverse effects on personnel of the forces generated by a fall. There are also lanyards without a shock absorber. Avoid using these types of lanyards for fall arrest as far as possible.  

Fall arrest lanyards can also be used for restraint according to the working area of personnel. It is absolutely mandatory that lanyards used for fall restraint have a shock absorber body.

Get expert support to choose the right product.

Let our team recommend the best equipment for your needs and quote you quickly.

Get in Touch

WhatsApp Request a Quote